September 16, 2019
After buying a growth tent, how do we install it? This article mainly describes the setup method in a detailed and assembly way. Of course, it can also be in accordance with the product purchase that comes with the instruction manual for assembly.
First of all, we need to choose a clean place to put the assembled equipment together as far as possible, so as to avoid unnecessary trouble caused by omissions in installation. So what do we need? The first is the grow tent, the tubes and steel connectors that supports the tent, the rope ratchets, the temperature and humidity meter, the growth lamp, the fan, the carbon filter and the flex duct, and you will see the power of rope ratchets.
Firstly, in accordance with the length of the tube and the connector,they will be the overall frame of the growth tent we are gonna to install, and then put tent on, especially pay attention to the installation which is close to the surface of the assembly part as far as possible fixed, to maintain the stability and safety of the growth tent, to avoid causing personal injury.
The second is about the interior installation of the growth tent. We can choose to start with the grow lamp. We take the ECO Farm 240W LED for an example which is specially designed with strip shape lamp. This lamp is very convenient for our installation. We need to use rope ratchets. First of all, we make the rope ratchets connect to the grow lamp, and then slowly pull up from the bottom up, to reach the appropriate height then we fixed the rope ratchets. This method is not only safe and simple, but also can easily control the lamp up and down. What we need to note here is to ensure that the rope ratchets is tough and the hook is firm, and the weight that the rope ratchets can stand must be much greater than the weight of the lamp.
The next step is the installation of the inline fan. Fan are mainly to maintain the temperature of indoor tents to avoid the large number of lights thermal heat which affects the life of the lamp. We can install the lamp on the inside of the tent to avoid taking up space.Hang it with hooks and rope ratchets and adjust it to a height that is just similar to the lamp, then secure it.
For the installation of filters, the installation method is the same as the fan, and the filter will be relatively heavier, so it is best to choose the ever-reliable rope ratchets, and the installation position can be in the back of the tent, to ensure that the air inside the tent must go through the filter to be excluded from the tent, and on the air balance problem inside the tent, we can try to make the vent down to avoid the leakage of light, and at the same time, it also can ensure the flow of air. Finally, check the stability of the installation of the devices, as well as whether there are missing parts or cumbersome things, as far as possible to keep the equipment in the tent solid and simple to avoid unnecessary space waste.
After learning the five steps we given, you must have a better understanding on the installation of the grow tents. And there will be a little differences among the different equipment. So if you have any puzzles got in your mind, please leave your note under the blog, and we would be thankful for your advice.