Dabpress 10 Ton Mini Rosin Press VS Qnubu Press Pro-Rot Hydraulic 10 Tons (Plate 12x12cm)

Introduction

Although rosin is a relatively new product in the concentrate world, it is progressing at a rapid pace when it comes to quality and popularity. This is undoubtedly due to advancements made in rosin press technology and the evolving techniques surrounding its production. Once a product created from hair straighteners and tortilla presses, rosin has come a long way, now created commercially using refined processes and precisely crafted pneumatic and hydraulic presses.

Advancements in rosin press technology have allowed for new and exciting non-solvent products to enter the market, peaking consumer interest in rosin. With rosin now rivaling hydrocarbon extracts in terpene content and potency, it’s no wonder why more and more people are making the investment in a quality rosin press.

What is a Rosin Press?

Today there's quite a bit of variety in rosin presses.

If you’re unfamiliar, a rosin press is essentially anything used to extract cannabinoids through heat and pressure. Typically speaking, a rosin press has two heated plates that are pressed down onto each other to create enough force to facilitate an extraction. There’s much more that goes into a quality rosin press though. And with more and more innovation in rosin press engineering, the quality of a rosin press has never been more important.

You can still use your hair straightener at home, of course, but there are now rosin presses specific for at-home and commercial levels of operation. Either way, a rosin press is basically two large flat plates, which heat up. When pressed together, by hand, automatic controls or mechanical methods, they slowly place higher levels of pressure on the product on the plates. As the raw flower or hash heats up under higher and higher levels of pressure, the microscopic oily cannabinoids and terpenes start to boil. Eventually, under the immense pressure, they explode through, and on to the paper.

Below is a comparison and introduction of two rosinpress, I hope it can be helpful to you.

Dabpress 10 Ton Mini Rosin Press

Features:

The Dab Press has the frame made of stainless steel chrome mount to avoid rusting; anodized heated platens offer even temperature heating.

Upper heated platen has a top-down movement

Independent heating rods & thermocouple guarantee the temperature is accurately detected & delivered.

Only use soft materials to press, do not press similar metal materials to damage the heating plate.

Qnubu Press Pro-Rot Hydraulic 10 Tons (Plate 12x12cm)

Features:

This Qnubu Press , with its 12x12cm board, is ideal to raise the professional standards of your herbal extractor while maximizing the return from your herbs and flowers.

This 10-ton press is equipped with dual heating plates, measures 12 cm x 12 cm, and has a compression power of up to 10 tons.

The digital control panel allows you to customize the precise compression force, temperature and operating time so that you can create the perfect household essential oil extract. 

Adjustable temperature and pressure mean that Qnubu has enough versatility

The main types of Rosin Press along with their advantages

Before reaching towards the best rosin press machines, we’ll discuss two of the main types here along with their advantages. So, you’ll get to know about the working conditions and construction assembly of both the models.

The first and common type is the heat press machines with the Hydraulic cylinders. As the name implies, the device makes use of compressed fluids technology to obtain the pressure. This type has advantages as it is safer to use and can achieve high amounts of pressure without any noise.

The second type is pneumatic rosin presses. These types of machines utilize air pressure for the extraction process. It is on the better side because of the easy maintenance and effortless controls.

Another advantage of this machine is that these are entirely oil-free. You don’t need to give oil to the machine parts more often, which can reduce the maintenance cost and time. These machines are also better and able to provide more pressure. But there are significant disadvantages that it may use more power from the source because the air can be compressed way more than the liquids in the hydraulic container. So, responsiveness ability can also be decreased in this way. Therefore, both types have their merits and demerits, which you need to observe deeply. Then, you may find a better choice for yourself, keeping in mind those factors mentioned above.

There are some precautionary measures which you need to take care of. Do not opt for a device having the odd features and faulty construction. Usually, the cheap rosin press machines are often loaded with the horse-shoe shaped heating plates. These are small and less effective for most of the substances and give less extracted results. Also, take care of weak structures that are often prone to breaking on the high pressure. Heat plates must be made from the durable and sturdy material, which can withstand high temperature and pressure. 

Buying Guide For Best Rosin Press 

Just like in every production venture, there are a couple of variables that you need to pay close attention to, to ensure that you get the best product possible. As far as rosins are concerned, these key variables are temperature, pressure, and time. Once you pay close attention to these, take proper care of your production materials, and exercise patience. There’s absolutely no reason why your cannabis won’t come out great, ready to use, or even ready to retail! So what are these three variables anyway?

Temperature

Paying close attention to detail is super essential here, you can't take your eyes off the temperature gauge, as that's a sure recipe for disaster. Always remember that lower temperatures and higher temperatures yield different results.

Lower temperatures (190°F- 220°F) give more flavor, yield substantially less, but the end material is usually more stable kind of like butter or the way honey feels at the concluding stage.

Higher temperatures elicit different produce. Usually, between (220°F- 250°F), this yields less flavor, significantly higher yield, and the end material is less stable than you'd get with lower temperatures.

Striking a balance is key in making the best use of your rosin press. Never go below 190°F and never go above 250°F. It might take some time and a whole lot of practice, but eventually, you'll find the secret behind this art form.

Pressure

Making rosins isn't exactly playing nationally televised sports, meaning that no rule states that higher pressure necessarily equates to higher yields. Instead, it's more like the opposite, as a lot of times the higher pressure might be the reason why a lesser yield is being processed. Why? because the increase in pressure forces less desirable materials such as lipids and other fine particles into your rosin, that's the reason why we always recommend that a proper equilibrium is reached and we don't get too caught up in shooting for the stars. So practice different pressure ranges, and work out the best pressure rates that work for you, it's a matter of time before you get the right spot!

Time

It's already no new right now that the time depends on what material you're using and the amount of pressure that you're applying, as well as your rosin press capacity. Timing is inexplicably linked to the initial variables of temperature and pressure. Like we stated previously, you'll get the hang of it as time goes by. Just to lend a helping hand, the flower usually goes at a temperature of 190°F-220°F and a timeframe of about 15-60 seconds. While average to low-quality sift/bubble goes at a temperature of 180°F-220°F and a timeframe of about 20-60 seconds.

Is it worth getting a rosin press?

It’s up to you to decide whether the benefits of weed rosin are worth your cash or not. The concentrate made with a rosin press is the easiest way to make dabs at home without using anything except heat and pressure. Using the right settings, you won’t ever mess the material and get the most out of it in no time. I can also help you imagine the benefit in USD. If you get flowers for, say, $500, you will extract oils worth $1000 from this quantity. Impressive, isn’t it? In addition, the rosin press lets you make a concentrate without solvents that can be a huge health hazard.

Conclusion

With rosin press machines you can extract a huge amount of oil from multiple materials. But how to choose such type of machine when there are several kinds of Rosin press machine models available in the market which works differently from other machines.

Most of the devices have a wide temperature and pressure ranges that can perform the extraction process for a wide variety of materials, mainly Rosin extracts, flower extracts, leaves extracts, and much more. Finally, I hope the above comparison and introduction are helpful to you.

Also in News