News

If you are new to growing cannabis, you are probably excited to get started. You have your grow tent or room all set up, your plants are ready, you feel good to go — until you realize … it smells.

Luckily, there’s an easy way to fix that. Carbon filters are wonderful for making sure grow areas aren’t blatantly obvious and/or stinking up the place. These filters also help regulate certain chemicals and contaminants that might be trying to ruin your cannabis growing experience.

In these reviews, we’ll go over our favorite carbon filters and even drop a bit of knowledge for purchasing one. With that, let’s go to the reviews!

How long does a carbon filter last?

Carbon filters last for around 6 months, which can vary depending on the grower’s environment. For example, if there is a lot of dust in your air or you are running several carbon filters at once then it will require more frequent cleaning. If you maintain them properly though, they should last for between 4–6 months before needing to be cleaned/replaced. Some growers replace their carbon filter every 3 months just to err on the side of caution while others only do it every few years (yes, years). It all depends on your individual situation and how well you take care of yours!

How to clean carbon filter?

Keeping your filters clean is essential for them to work properly. This will depend on the type of filter you’re using but there are some common steps that can be followed regardless of what’s being used.

First of all, you’ll want to remove the carbon from inside your filter and wipe it down with a damp cloth or paper towel. Make sure not to get too much water in there otherwise, it may damage the filter!

Once this step is done, leave both filtration mediums out in the sun for an hour or more. This will help evaporate any excess moisture trapped inside which can also affect performance. After an hour or two, you should be able to put everything back together without problems.

ECO Farm Air Filter 2 Inch Thickness Carbon Layer

Features:

ECO Farm carbon filters are made of high quality activated carbon which provides 100% filtered airflow. Due to the optimized surface area of each carbon particle, the carbon capture is three times higher than the average air pollutant. It prevents chemical irritation and eliminates odors — from stimulating indoor growing jobs to basements and kitchens, eliminating some unwanted odors, pungent odors and particles in indoor grow tents and hydroponic grow rooms. This product can be used as an intake or exhaust filter in a variety of settings, including the use of direct exhaust fans and duct fans, ventilation ducts and other accessories. Equipped with a pre-filter cloth that blocks 99% of particulate matter, prevents the air carbon filter from clogging and keeps it clean; it is recommended to replace the pre-filter every 6 months to protect your filter and keep it in good condition.

SunStream Air Carbon Filter for Inline Fan

Features:

Sunstream carbon filters use only top quality RC-48 charcoal sourced from Western Australia. The carbon bed in our filter is 38mm thick and the machine is loaded with extremely small particles. Sunstream carbon filters are designed with years of growth in mind. We don’t sacrifice the quality of key components to make some extra coins. Our carbon filters, combined with the proper fan, will eliminate odors in your greenhouse or grow tent. This carbon filter can help you filter out cigarette smoke, plant allergens, and machinery or any other foul odors in your home, workshop, commercial space, and more.

Buyer Guide: How to Choose the Best Carbon Filter for Grow Tents

With an ever-expanding market, there are more and more products to choose from when it comes to picking what you’ll put in your grow room or tent. As such, it is getting increasingly difficult for a newcomer to not be overwhelmed when making the leap into growing. In this section, we’ll go over things to consider before you purchase a carbon filter.

Materials
There are different materials that these filters can be made out of, and they all have their advantages. Galvanized steel is a common material. This metal is heavy and normally promotes a longer life for the filter. You will have to make sure that your grow tent can support the weight.

Aluminum is a lighter weight option but has a shorter lifespan. These will fit into more tents, but you might have to buy them more frequently.

Pre-filters
Some pre-filters are washable, meaning that you can use them over and over. Others are not but are preferred by growers because they catch more particles. This can add expense to your operation. Most filters come with a set of pre-filters.

Charcoal
The thickness of the layer of charcoal and the shape and thickness of the granules play a big role in how effective your filter will be. A thicker layer will catch more odor and bad chemicals, but the granules should be as thin as possible. The more that are packed in together, the less room there is for any smells to get through. Of course, this could affect your air flow, so be sure to consider that as well.

Size of operation
One of these filters can work great for smaller operations, but if you wind up growing a whole bunch, you will certainly need several. You might also want to consider industrial-size filters at that point.

Warranty
We always recommend checking the warranty of any product before buying. It is also a good idea to look into the reputation of the custom service staff. A lifetime warranty won’t do you any good if nobody responds to you.

Conclusion

All in all, carbon filters are one of the safest and most effective ways to keep your grow tent fresh and free of odors. If you make sure that you check the following factors when buying new ones (CFM needs; size; budget; filtration; noise level; etc.) then you’ll be able to find the perfect product for your grow room!

Growing plants in grow tents requires proper ventilation. We’ll show you how to find the best inline fan for grow tent ventilation. See the best options for quiet operation, powerful air movement, and long-term durability. We’ll also show affordable options for each fan size for growers on a budget.

The advantages of Inline duct fans:

Make the indoor air cleaner:
Putting inline duct fans in rooms like bathrooms or kitchens can make the air cleaner. People who live in rooms with an inline duct fan can get rid of things like bad smells in the toilet and stale air quickly.

Remove the Bad Smell:
Even if the smell comes from a room that doesn’t get a lot of air, like the bathroom, people think the room is very dirty, which makes them not want to go in.

Removes Air Moisture:
A room that is too humid makes the air smelly and stale, making it hard to breathe. As long as it doesn’t get dry enough, it could damage the walls and ceiling of your house. Moss and fungus can grow in even the tiniest parts of a room. This is why it is vital to get rid of these things quickly.

Make the air cleaner:
Cooking smoke, cigarette smoke, hot air, and unpleasant odors are terrible for your lungs. Then, too, if the air is dangerous and can cause sickness if breathed in for long. Clean air must always be present in the house to make everyone feel at ease.

As an air conditioner:
Inline duct fans can also cool the air in a room by moving it through them. These actions are all based on how the inline duct fan works. The fan takes the hot air from the room and moves it outside. Then, it brings in a new perspective so that the room is cooler afterward.

ECO Farm 12'’ MAX Inline Fan

Features:

This ECO Farm inline duct fan is used in indoor grow facilities and vertical farms, heating and cooling transfer, commercial drying and air filtration applications. Inline blowers can also create a negative pressure environment, simulate wind, exhaust odors and fumes, and draw in fresh air from outside. The blower provides an airflow rate of 2120 CFM using 550 watts at maximum speed. The fans don’t “purge” at lower speeds or waste power. The fans give you unique control flexibility without background noise or hum at low speeds. Coated steel housing prevents rust and protects the motor and blade from accidental damage and harsh elements to reduce maintenance in demanding applications.

JETFAN Mixed-Flow Digital Fan

Features:

Controlled by a 32-bit microprocessor, these powerful mixed-flow digital fans deliver outstanding performance and value. Available in 4", 6", 8" and 10" models, Jetfans is the ideal solution for your ventilation needs. Because the motors in these fans are EC (electronically controlled), they offer very high efficiency, reliability and controllability. They include a highly precise speed control unit that can be detached from the fan and power cord if desired. Low power consumption — Jetfans run only 25% of the power of comparable inline fans Their EC motors are efficient, reliable and responsive to speed control ETL certified

HURRICANE Inline Duct Fan

Features:

Hurricane® Inline Fans are commercial grade high performance fans. The housing is made of steel with a durable powder-coated finish. Made with premium UL components for quiet operation. Includes mounting bracket with easy-to-follow instructions. From carbon filters to ducts, these in-line fans do everything, and with the included 120-volt power cord, they’re easy to install and run. Installation takes only a few minutes, and the fans provide extremely reliable high-performance operation and are backed by a 5-year manufacturer’s warranty. Whatever your ventilation needs, high performance and reliability are what you can expect from this fan.

The Most Important Factors to Consider While Choosing an Inline Duct Fan

You should have no trouble finding an inline duct fan to add to your HVAC system because many alternatives exist. Besides the fan, you might also need other things to make the system run more efficiently and ensure the fan always has fresh air. So, let’s look at some more things that can search for an inline duct fan to go faster and more quickly.

SIZE:
The 4-inch, 6-inch, and 12-inch sizes are some, that you can buy. An equation can help you figure out how big your grow tent or room should be. First, determine the cubic feet of the grow tent/room where the inline fan will be put. To do this, multiply the length, width, and height of the room/tent by that number.

AIRFLOW:
Airflow is typically measured in (Cubic Feet per Minute), which is how much air the fan moves in a minute. This is actually the amount of air the fan can move in that particular time. If you know how big your tent is, you can choose the right CFM for an inline fan.

SOUND:
In general, no one likes noise, especially regarding appliances used in the home. It’s common to see product descriptions for inline fans that truly describes the amount of noise the product produce. Make sure you check the noise level of the inline fan, before you buy one. If you set the fan speed too high, it will make more noise. Other than that, if you slow down the speed, the less noise it makes.

SPEED:
Automatic controllers are found on most inline air fans. This means that you can set the speed of your fan with them. It would help if you controlled the speed of the fan to keep the humming and the amount of air your plants get from the fan down.

PRICE:
There are a lot of cheap inline duct fans on the market, but there are also some that cost a lot of money. It would be best to choose what fits your budget and works well in your grow room or tent.

Conclusion

This article thoroughly discusses inline duct fans, their operation, performance, size, and other aspects. Inline ducted fans are known for their properties of removing dirty air and purifying it. To keep cool, we can use it as an air conditioner. In most cases, inline ducted fans remove heat and moisture from the growing area.

In the end, I hope you can find the best inline duct fans after reading this article. Happy growing!

When growing plants, patience is a virtue! It takes several weeks before it is finally ready for harvest. Now that your plant is looking and smelling all good, the next thing that you have to do is to cut the bud.

Some people will consider cutting the bud manually. It takes quite an effort on your end, especially if you have to cut a lot. With this, a bud trimmer machine can be a true lifesaver!

A bud trimmer will help to speed up the job, saving time and effort! Of course, this will depend on the trimmer that you will choose, which makes it important to be a responsible buyer.

Clueless on which bud trimmer will be best for you? We got you covered! Read the rest of this post and we’ll give you a quick look at some of the top bud trimmers available.

What are the Benefits of Bud Trimming Machines?

Trimming machines are loaded with benefits that streamline the trimming process.

Below, we’ll discuss the primary benefits that make bud trimming machines worth every penny.

Save Time
Trimming plants with traditional scissors nearly guarantees the perfect cut, but it consumes hours of hand-numbing effort.

Now, compare that with a basic manual trimming machine, which could trim one pound of wet plants in roughly 1-hour. In another instance, a high-end industrial-grade trimmer can trim upwards of 120-pounds of wet plants in an hour.

Trimming Machines Save Time
Trimming plants with traditional scissors nearly guarantees the perfect cut, but it consumes hours of hand-numbing effort.

Suitable for Any Yield
Whether you harvest one ounce or one hundred pounds — there’s a specific trimming machine that can handle any yield.

For instance, a home grower can use an electric handheld trimmer for nearly any harvest size. Alternatively, professional growers can scale their trimming production with the help of a large drum-style trim machine.

Extremely Easy to Use
With a few turns of the handle, home growers can quickly trim wet or dry plants in a manual bucket trimmer. Similarly, home growers can whisk away leaves in a jiff with the help of a high-powered handheld electric trimmer.

In other words, there isn’t much skill involved in operating a plant trimming machine. Instead, home growers and professionals can master their bud trimming machine after a few minutes of use.

Trimming Machines Easy to Use
There isn’t much skill involved in operating a plant trimming machine so using them is incredibly easy.

Lack of Help
I’ve found myself alone many times during harvest season, and it turns a normally tedious session of snipping leaves into an all-day endeavor.

Luckily, bud trimming machines are used to replace hired or volunteer-based help.

TrimPro Rotor Trimmer

Features:

Trimpro rosin presses are designed and developed at the request of customers who are looking for another gentle and efficient Trimpro quality product. This is an easy-to-use flower trimmer that will save you time and money during harvest. Trimpro rotors feature high-speed, height-adjustable blades that process large volumes of product quickly while maintaining a gentle and consistent cut. Use soft leather fingers to loop your blooms over the nonstick grate, and the leaves are trimmed with sharp tempered steel blades. These leather fingers help to gently flip the flower, allowing the blade to cut all sides of the flower.

ThunderVak Composter Plus (Version 2.0) Leaf Trimmer

Features:

The THUNDERVAK™ is the most efficient leaf cutter, featuring a powerful North American motor, nylon “cutting” cords instead of blades, and a circular enclosure that prevents product spillage. THUNDERVAK™ can significantly reduce operator handling of plants. Without a doubt, the THUNDERVAK™ Leaf Clipper is the fastest and safest way to trim plants. It is made in Canada using only North American parts, backed with a one year rebuild or replace warranty.

Things to Look for Before Buying a Bud Trimmer

If you’re on the search for a bud trimmer, you’ll want to keep a few things in mind. These aspects will help to ensure you buy the right model for your needs.

Its Size
An important thing to look at before buying a bud trimmer is the size of the machine. The size will determine how many buds you’ll be able to pour into the bowl and safely trim. If you only plan on using a small amount, a smaller option would be ideal. However, if you need to trim a large amount of buds, you’ll want to look for a machine that is somewhat big, such as 16 inches.

How Easy the Handle is to Spin
Another thing to consider is how easy the handle on the top is to spin if you buy a model that has this feature. The handle is what will activate the blades which is why it’s important that it’s located in an easy-to-reach area and can be twisted around with hassles. Otherwise, it might be too difficult to move which can result in the buds not being trimmed properly.

If it’s Detachable
If you’re short on space or just want to make sure you can discreetly put your bud trimmer away, look to see if it’s detachable. Many of these models can be detached, starting with the handle and the bowl. This can help to save you space and protect your bud trimmer from possible scratches and other damages if put away in one piece.

How Easy it is to Remove the Buds
You should also look at how easy it is to remove the buds. Does the machine have a special grate where they fall through? Does it come with a grill where the buds will rest once they’ve been chopped? If the machine doesn’t have a feature such as these, it might be a little difficult to remove the buds by hand. It could also be dangerous as your hands will be near the blades. Due to this, check to make sure that there is an easy way for you to safely remove the buds from the bud trimmer.

If There’s an Adjustable Blade
An adjustable blade can be very helpful when it comes to trimming buds. With this feature, you’ll be able to choose the angle as to how the buds will be cut. This means you’ll be able to choose whether you want them trimmed to be a little large or very fine.

Conclusion

If you have grown tired of cutting buds manually and ending up with sub-par outcomes, now is the time to make the switch. Consider any of the bud trimmer machines mentioned above, and for sure, your life will be a lot easier!

When it comes to growing seedling and some vegetables like lettuces, microgreens, T5 grow lights seem to be the best. HPS bulbs are expensive, hot and contain much space while you have to pay extra money for the future research of LED lamps.

There are a lot of T5 manufacturers and resellers on the market. So it’s a hard decision to make for choosing the best T5 grow lights. However, after doing hours of in-depth research, and discussion with some experienced growers, here are our top choices.

What are T5 Grow Lights?

T5 grow lights are a type of fluorescent bulbs that produce artificial lighting to stimulate the growth of plants grown indoors or any place where there is insufficient light. “T” stands for “tubular” and “5” for “5/8 inch” tube diameter.

There are other fluorescent tubes as well, including the T8s, T12s. But T5s are the most popular and efficient among the three.

T5 grow lights have been used to grow seedlings, green vegs indoors for decades.

Why use T5 Grow Lights?

If you just start with indoor or hydroponic growing, the first significant factor you must take into account is how to provide your plants with enough lights.

You may have known that plants cannot survive without lightning. So can artificial lights replace the sunlight when it comes to growing indoors?

The answer is yes.

In fact, there are a lot of choices, including CFLs, T5s, T8s, T12s lights, HIDS (HPS and MHS), and later CMH, and LED lights.

However, for seedlings, leafy vegs like lettuces, spinaches, T5 are among the top choices not only because of its light intensity, and spectrum color wavelengths, which are suitable for these plants, but because they are cost-effective as well.

If you use CFLs, T8s, T12s for your grow setup, you may save yourself a couple of dollars for several years running. But you’ll never have as green and fast-growing plants as you do with T5s light because T5s give more light intensity to plants than the three types above.

Most HIDs, LEDs are not cost-effective for growing veg plants, and seedlings and are much more expensive to purchase. This explains why lots of commercial growers and hobbyists still favor T5 bulbs.

ECO Farm T5 24W Fluorescent Grow Light

Features:

This ECO Farm t5 Grow Light comes with (4) 24W T5 High Output LED Tubes and is designed for horticultural use. This fixture mimics natural sunlight conditions and is ideal for all stages of plant growth. Save over 60% on your lighting and HVAC bills compared to traditional fluorescent lamps. Red and deep red wavelengths increase the rate of photosynthesis and accelerate plant growth through the Emerson effect. With an extra-long 30,000-hour lifespan, this grow light is perfect for beginner or professional growers. ECO Farm T5 fluorescent lamps can be daisy-chained to matching fixtures for virtually unlimited expansion. Mount the light in any indoor location using the wire rack provided.

AgroBrite T5 2FT 4 Tube Fixture w/bulbs (was EnviroGro)

Features:

Agrobrite’s T5 grow lights can ensure high flexibility, high lumen output and outstanding performance. Grow lights use high-quality aluminum and high-efficiency T5 tubes, which can ensure twice the power compared to ordinary grow lights. You can hang the fixtures 3 ways — horizontal, overhead and vertical to cover the largest growing area. High-intensity light emits very little heat, making it ideal for indoor growing. The 6400K color spectrum is somewhat similar to natural sunlight/sunlight, so your indoor plants will grow as healthy as your outdoor plants.

Grow Crew HO T5 4’, 4 Bulb Fixture w/ Bulbs White

Features:

This 4 foot 4 light high output T5 light fixture comes with the bulb spectrum of your choice so you can tailor the light your plants get to your exact needs. The housing is powder-coated to withstand humidity without rusting or corrosion. Two switches on the side control whether you want four lights or eight lights on at the same time. The Grow Crew Fluorescent T5 Luminaire is ideal for those looking for a compact, low-heat, high-efficiency lamp. You can fully customize your unit by choosing a combination of red (3000k) or blue (6500k) bulbs. Each bulb draws 54 watts for a total light output of 216 watts.

Things you should know before shopping for T5 grow lights

There are some crucial factors you need to know to maximize your buying decision.

Sizing
The thickness of the T5 bulb is standardized to 5/8’’, but the length can vary. Two typical tube lengths are two and four feet.

The more tubes with greater length, the bigger your fixture will be.

Rule of thumb: Get the largest size your indoor garden can comfortably accommodate.

Why?

Most modern fixtures allow you to turn on/off separate bulbs. This feature will enable you to adapt the grow lights for the best light efficacy and save electricity consumption as well. So with a large-size fixture, you can customize the light output for different plants. In contrast, you’ll never be able to do that if you get a small fixture right from the start.

Also, a larger and more powerful fixture also helps you to back up in case you extend your growing spaces in the future.

Bulb Temperatures
T5 grow lights have two bulb temperatures. Each has its function in assisting plants through all stages of growth.

6,500K bulbs are practical for microgreens, seedlings, and plants in the harvest. These are the most popular T5 Kevin bulb type.
3000K bulbs help plants to flower and give fruit
Those who just want to use T5s for seed starting and growing vegs can be satisfied with using only 6,500K bulbs. If you’re going to grow fruiting plants, you can combine whiteish bulbs (6500k) and some yellowish bulbs (3000K) to provide more spectrum wavelengths for plants to maximize their growth.

The reflector design
The reflectors do increase the focus your T5 lights, which helps improve the efficiency of your lights.

There are two common reflector styles:

Rectangular reflector: You can place the reflector closer to the plants for better coverage
Gullwing style: This is ideal if you need to place your grow lights higher. This design allows you to redirect light back into the grow room if it’s seeping out
Ability to control the bulbs separately
Look for a T5 fixture that has this extra feature. You can control the lamps independently by dimming or switching off some while others stay on.

This feature is beneficial because not only it helps you save energy by turning off some wasted bulbs, but it also gives you the ability to light planted areas. And best of all, it’s handy when you grow different types of plants which you can customize the light intensity to fit.

Conclusion

With so many high-quality products available, it can be a difficult task to choose one.

Many of the other T5 grow lights reviewed are optimal at what they do, but many are limited to specific use cases, such as germination and cloning, or vegetative and flowering phases.

Depending on your needs, one of these T5 grows lights may fit your situation perfectly.

If you’re ready to save money and increase the efficiency of your grow room, the time is now to make the switch to the best T5 grow light available.

It’s that time of year and many of us (myself included) are gearing up to start seedlings indoors. These are some of the best LED grow lights for plants, not just for starting seedlings, but also for growing indoor gardens and microgreens!

Wondering if you need grow lights for plants you are growing? Typically, vegetables and fruits will need grow lights, while most common houseplants won’t. The reason that the houseplants most people grow are popular is because they have low lighting requirements, aren’t as picky about watering, and are overall some of the easiest, and hardiest plants to grow.

If you think about it, when you are growing edible plants for food, you are placing much higher demands on them. A houseplant is just expected to sit there and look pretty. If, on the other hand, you are growing plants for food, you want them to produce fruit or quickly grow new leaves. They are going to need some light to do that!

How many watts per square foot for led grow lights?

LED growers to report that they have been able to get similar yields on just 18″ of their plants by increasing the intensity of their fixtures which would work out to be roughly 66 watts per square foot if you’re bringing them closer together or even down to 36-watt hours per sq ft for larger spaces!

The watts per square foot for LED grow lights are much lower than HID lighting systems. For example, a 1000W MH light can use up to 200–400 Watts and produce around 60,000 lumens while an LED fixture with the same size might produce anywhere from 40–200 Lumens but only uses about 20 Watts! That’s as much as 80x less energy used when using LEDs vs. MHs in your grow space.

ECO Farm MB3 Pro 760W LM301B LED Grow Light

Features:

This ECO Farm LED grow light has a total of 2880 LED chips, which can provide a large illumination area for a large number of plants. Lightweight aluminium alloy material, detachable light bar design. Great for indoor, greenhouse growing, personal and commercial growth. The full spectrum of this grow light is designed for the entire plant life cycle. The light intensity can be adjusted by the knob. The SMD LEDs used in this LED grow light are professionally customized and produced using the latest technology. So it has a higher light intensity, lower light decay rate and higher PAR value than ordinary lamp beads. It provides high light efficiency of 2.8μmol/J, and a PPFD output plant light of 2128μmol/㎡s. It saves up to 50% energy and 30% cooling than other grow lights. The latest aluminium radiator has a special surface treatment that doubles the cooling area.

Mars Hydro FC 8000 LM301H LED Grow Light

Features:

The Mars Hydro FC 8000 LED Grow Light is designed and engineered with commercial cultivators in mind but is also perfect for nearly any personal grow. This powerful light delivers impressive results with an average uniform PPFD of 1500 μmol/s, sufficient to activate 100% photosynthesis and achieve maximum yield with or without CO2. The FC 8000 has more than twice the number of LEDs as comparable lamps. The 2968 top-of-the-line Samsung LM301B and Osram 660nm diodes bring quality assurance and high efficiencies up to 2.9 μmol/j. The multi-light strip design and the dense placement of LEDs enable the FC8000 to achieve PPFD values in the range of 1000–1500 μmol/s in the effective coverage area, which matches the optimal cultivation range when using CO2.

Kind LED X750 Grow Light

Features:

Kind LED combines the great innovation of our flagship X² light fixture with a new form factor optimized for the home grower. KIND’s new X-Series uses top-of-the-line OSRAM and Phillips diodes to generate targeted full-spectrum light as well as UV and IR to enhance your plants during flowering. The KIND X750 uses the full spectrum white LED diodes used by top LED companies. Kind’s Targeted Full Spectrum is designed for plants to maximize harvest weight and plant quality. With 750 watts of power and a 4' x 4' footprint, the X750 is powerful enough for commercial growers while still being compact enough for single planting.

What to Look for in a Grow Light

Size
When deciding what size grow light you need, think about how many plants you’ll need to cover. Also, if you’re planning to move your light from place to place, you might want something lighter and portable, whereas if you know it’s going to stay put, that might not be as much of a factor. Also, consider the space where you plan to put it, and make sure there’s room for it to operate safely and not up against furniture, drapes, or other items.

Type
There are various types of grow lights to consider, from panels to ones that hang overhead or screw into a regular light fixture. The type of plants you have, the amount of existing natural light, and where your plants are located will help you narrow down your choices. Hanging lights are typically larger, while desktop lights are smaller and easy to move around. If you want a complete system, consider a full garden kit that includes the planter with a built-in light.

Wattage
Wattage isn’t as important as you might expect when it comes to grow lights, but it’s still a factor worth considering. The more important metric is actually PPFD, or photosynthetic photon flux density, which measures the specific light emission a lamp gives off.2 Because this is a bit complicated to figure out, wattage is a useful tool to determine the correct fixture for your plants. The rule of thumb is that you need 32 watts per square foot, so most indoor plants (especially herbs) will do just fine with a lower-watt light.

What’s the right distance to keep your LED lights from your plants

It’s crucial that you put your lights as close as possible to your plants, without causing light burn, because this will directly affect the potency of your buds.

But it’s just as important not to put your lights too close to your plants.

But what’s ‘too close’?

This is highly dependent on the light’s brand and model.

The more powerful the light, the higher the minimum distance between your light and your canopy is.

LED manufacturers always provide minimum distances with their products, and you should use these.

Ultimately, you’re going to keep a close eye on your plants and act accordingly:

Raise them in a few inch increments when they show signs of stress/light burn, and;
Lower them when you feel your plants need more intensity.

How Long Should a Plant Grow Light Be Left On?

As a general rule of thumb, most vegetables and flowering plants need 12 to 16 hours of light per day, with flowering plants at the top end of that range.
Plan on giving most plants at least 8 hours of darkness per day.
But remember that different types of plants may need different amounts of light.
Darkness is actually very important for the plant growth cycle. During the day, sunlight helps plants produce energy through photosynthesis. At night, however, plants break this energy down for growth and flowering in a process called “respiration”.

Check your seed packaging or plant tags, or ask at the nursery for specific suggestions. And make sure you turn your grow lights off every once in a while. No one likes to work 24 hours a day — even plants!

Conclusion

Indoor gardening has never been easier. Grow lights for indoor plants allow you to cultivate a wide variety of plants at any climate during any time of year. These growing lights are specially designed to substitute natural sunlight, stimulating photosynthesis and providing the right color spectrum where the plant can grow and flourish.

Happy growing!

When growing your plants indoors hydroponically, you must take special care to mimic the plant’s natural habitat. Bringing in tools such as dehumidifiers, humidifiers, and inline fans helps create realistic environments with ideal grow room temp and humidity levels. Today, we will share the best inline fans for your grow tent. Whether growing large plants or small, they all need a lot of TLC, and inline fans help with that to make sure your plants get fresh air indoors!

The best grow tents all have one thing in common- a great inline fan. The benefits of inline fans for your grow tent are endless, and perhaps inline fans can be deemed essential to successful indoor growing, whether hydroponics or otherwise. Inline fans cool grow areas that may receive a buildup of humidity. How do you lower the humidity in your grow tent? Ventilation and air filtration are necessary for healthy and robust plants. All important reasons to consider one for your grow tent!

How to calculate the size of the inline fan you need?

How big an inline fan you’ll need for your grow space depends on how much air you need to move for your plants to be healthy. In general, if you have a 3x3x6 feet grow tent or smaller, you can get by with a 4-inch carbon filter and inline fan. If you have anything larger than that, up to 5x5x6 feet, a standard 6-inch carbon filter and inline fan should do the job. Anything larger than that, you’ll have to calculate it out yourself.

To calculate this, you’ll need to know how much air you need to move per minute, considering the size of your grow space. It is calculated in the inline fans through its CFM rating or cubic feet per minute rating. For example, let’s say you have a 3x3x6 feet grow tent setup. It means that you’ll need to move 3x3x5, which is 54 cubic feet of air per minute. So you’ll need a 54 CFM inline fan if you’re not planning on using any ducting or a carbon filter.

But if you want to use ducting and a carbon filter, it gets a little dicey. Adding ducting and carbon filters makes the inline fan less efficient by making it harder to push and pull the air through. You’ll then need to multiply the total CFM by two if the air doesn’t have to go through too many hoops. Multiply it by three if there’s a lot of ducting involved.

A carbon filter will also have a CFM rating. It tells how much air the carbon filter can push or pull per minute. All you need to do is to make sure that this number is similar or higher to your inline fan’s CFM rating; otherwise, it will bring the inline fan down.

ECO Farm 6 Inch In-line Fan Exhaust and Intake Fan for Grow Room-White

Features:

This ECO Farm inline duct fan features a powerful blower with a fan speed of 2550 RPM and an airflow of 390 CFM. Move air efficiently through your target location for optimal ventilation. The in-line ducted fan has a one-year warranty, high working efficiency, shock resistance and stability, and low energy consumption to achieve a perfect sense of use and optimal airflow. Greenhouse ventilation fans are very suitable for controlling the growth of tents, hydroponic plants, high temperature and high humidity indoor garages and other confined spaces, air circulation, odor removal, and keeping indoor air fresh. The 6 inch duct fan has a removable and fixed locking steel buckle for quick removal and easy maintenance. Fans can be installed in a straight line or at any angle in the ductwork. The installation box can be rotated and installed at will, which is convenient for installation and connection.

iPower Booster Fan Inline Duct Vent Blower

Features:

Portable and lightweight, this iPower in-line duct fan can be installed anywhere because it features an extra-long 5.5' grounded power cord inside. The maximum ambient temperature is 60°C / 140°F. The advantages of fans are that they can deliver large amounts of air quickly and efficiently; temperature control — cooling chambers that tend to accumulate excess heat. If any other substances/particles get into the ducted fan and jam the blades, the user should immediately turn off the power, clean it up, and turn the power back on after proper disposal.

How to Choose the Best Inline Fan

As you search for the best grow room fan, these are some of the most important things that you have to take into consideration:

Material: This is an important consideration as this will be indicative of the performance and quality of the inline fan that you will choose. Steel is one of the most common. In most instances, steel is also powder-coated, providing it with the ability to resist external elements that could lead to physical damage.
Size: The diameter of the inline fan determines its size. The larger the grow room is, the larger is the fan that you will need. This is because it will be more powerful, making sure that the entire area of the tent will be properly covered. If the grow room is small, a 4-inch inline fan will be sufficient. If it is large, a 10-inch fan will be a good pick.

Noise: As it generates air, noise can be an issue. If you live in a small house, the noise can be loud and annoying. With this, settle for a model that generates as little noise a possible. The fan must provide whisper-quiet operation. Innovative features have been introduced in the past to make fans powerful without making a noise at all!

Speed: Do you want the inline fan to run slow or fast? It will be good if you will have the freedom to adjust the speed as desired. With this, so that you will be able to customize it, you need to find one that comes with a speed controller.

Power: The power of the fan refers to how much air it can generate. This is expressed as CFM or cubic feet per minute. The higher the CFM, the more powerful the fan is, and hence, it will be suitable even if you have a large grow tent.

Motor: As you determine the power of the inline fan, you also have to look at the motor, which will have an impact on its overall performance. A high-quality motor needs to be powerful without making a lot of noise and while maintaining energy efficiency. It will also be good if the motor is maintenance-free.

Ease of Installation: There is no need for professional help when installing an inline fan. Choose a product that comes with a user-friendly design so that installing and operating the unit will be a snap on your end. A mounting bracket should already be included. It should also come with detailed instructions from the manufacturer.

Warranty: What happens if the inline fan becomes defective? If it is still within the warranty period, you can return it to the manufacturer. They can have it replaced or repaired, depending on the terms and conditions. At the very list, choose a product with a warranty coverage that lasts for a year.

Conclusion

After going through all the fans’ features, we found ECO Farm 6 inch Inline Duct Fan to be the quietest. Producing a minimal amount of noise gives you maximum output at every speed. It is budget-friendly and quieter than the rest of the fans. Its high-quality engineered design is quite sturdy and durable. What more can you expect? The ECO Farm inline fan fulfills every aspect of your requirement.

All the other products also operate quietly. From maintaining an optimum temperature in your plantation to operating at variable speeds, the above-mentioned fans never fail to surprise us. Choose wisely, as inline fans are an essential requirement for your indoor grow tent.

Humidity plays a crucial role in plant growth and health. Every type of plant and each level of development requires a particular level of moisture. Therefore, farmers need to monitor and regulate humidity. High humidity harms plant health. Also, they accept issues like foul-smelling mold and fungus. Therefore, the best dehumidifier for grow room is important for any high humidity growing room. It is safe, energy-efficient, well ventilated, and uses less energy. It won’t take your electricity or utility bills higher. To help you get the best dehumidifier for grow room, we have compiled a list of the best products.

Why your grow tent needs to be dehumidified

It may seem unusual to say that you need a dehumidifier in your grow tent. After all, water is essential to a healthy hydroponics growing environment (why, “hydro” is even in the name!). While that is true, on the other hand, moisture can also be the bane of the existence of a grow tent environment. With all the water present in a grow tent, it makes sense that a lot of water can be found in the air, particularly when you consider that grow tents are generally small, enclosed spaces. This moisture in the air can lead to a host of plant-ruining issues. Excessive moisture in the air can lead to mold or root rot, which can decimate any crops you are trying to grow in your setup. A dehumidifier is an absolutely essential component of the setup because it can help ensure that the air in your grow tent has a healthy balance of moisture without unnecessarily exposing your crop to the dangers of moisture related conditions.

Where should you put a dehumidifier in grow tent?

Pay attention to get the perfect dehumidifier placement in the grow tent during installation. Where you place the dehumidifier is an influential factor when it comes to using the full efficiency or potential of the device. Where you place the dehumidifier will determine the results of the dehumidification process that happens within the grow tent.

There are several criteria that will determine where to place your dehumidifier. For example, size of the room, number of plants in the grow tent, the layout of grow tent, the amount of water used on a daily basis, airflow in the space, ventilation and air movement, climatic conditions, dehumidifiers’ and units’ capacity, type of dehumidifiers used (freestanding, whole house, ducted, suspended), standard temperature and humidity level of the area, etc.

It has been advised that depending on the airflow from the fans, you can try this when you wondering ‘Where to place dehumidifier!’ If the units in the dehumidifiers have a fan with good airflow, you can suspend the dehumidifier above the lights. This is also an answer to fit in even a powerful dehumidifier in grow rooms with limited space.

If the square feet area of the grow room you are dealing with has more space and more than one dehumidifier in it, you much pay some thought into placement. Ensure that the dehumidifiers are evenly spaced. This type of placement and space is important because the dehumidifiers (or space) will create a zone around them. If the humidity level in one zone happens to increase, the unit will have the capacity or responsibility to control or concentrate only on its own zone. Having more than one unit is also beneficial in getting the work done.

However, this might not be a cost-effective solution for all growers, hence not many would support this point of view. The next detail to remember during dehumidifier installation is the air filter in the unit.

“It is recommended that you setup the device within the room in such a way that the filter side should be facing towards the middle of the grow room.”

ECO Farm Mini small 500ml portable air conditioner dehumidifier

Features:

This ECO Farm dehumidifier has a 16 oz (500 ml) capacity water tank and can dehumidify up to 2200 square feet. It absorbs excess moisture from the air and can remove up to 11.8 oz (400 ml) of water per day. Releases dry air so you can breathe comfortably. When the water is full, the dehumidifier will automatically stop working to prevent the water from overflowing. In addition, the dehumidifier LED light will illuminate to remind customers to empty the water tank. It only works effectively above 15°C/40°F. Not only is this compact dehumidifier very energy efficient, it’s also very quiet, allowing you to run it all night without making any loud or disturbing noises.

Eva-dry Edv-1100 Electric Petite Dehumidifier

Features:

The EDV-1100 is a small electric dehumidifier with Peltier technology that runs on just 22.5 watts and is very quiet, making it ideal for nurseries, home offices, laundry rooms, boats, RVs and bedrooms. This portable dehumidifier should be used as a 1 room dehumidifier for maximum effect. The unit can work in house areas up to 1,100 cubic feet. It absorbs up to 8 ounces of water per day at 86° F and 80% R.H and has a 16-ounce removable reservoir with full indicator lights and auto shut-off.

hOmeLabs Small Space Dehumidifier with Auto Shut-Off

Features:

The hOmeLabs compact dehumidifier safely and effectively removes moisture from bathrooms, kitchens, closets, wardrobes, small garages, boats, RVs and any space up to 150 square feet. With its ultra-quiet peltier technology and 25W ETL certified adapter, this energy-efficient dehumidifier actively prevents humidity in tight spaces. Featuring a 16oz/500ml capacity water tank, this small and compact dehumidifier extracts up to 9oz/250ml of moisture per day in enclosed environments and small rooms and spaces. This dehumidifier features a low-noise thermoelectric Peltier module and an energy efficient 25W ETL certified adapter to prevent overheating and make it safer to use. Ideal for use at night with low energy consumption.

Factors to Consider When Buying the Best Dehumidifier for Grow Room

Rate of dehumidifying
Calculating a dehumidifier’s capacity is crucial to look for in a dehumidifier. Many large dehumidifiers can hold up to 18–20 ounces of water in a day. 8 to 12 oz of moisture is expected for smaller units. However, the greater the dehumidification performance, the greater the energy consumption. And you need to know how often the dehumidifier is used.
 
Temperature requirements
Different types of grow rooms and plants need different ambient temperatures to thrive. The same is valid for growth cycles. In addition, the local climate has a significant impact on the grow room humidity. When shopping for the best dehumidifier for grow room, choose the one that suits your temperature needs. For example, if your city has high temperatures, you need a more efficient dehumidifier.

Size
When buying the dehumidifier for grow room, you need to consider the size. If you have a small room with few plants, a more solid dehumidifier will do the job well and take up valuable grow space. The smaller model needs to be emptied more often, leading to mold formation. The model with an outlet hose would be a reliable option.

Nevertheless, if your room is larger, you will need a dehumidifier to keep the humidity below the required levels. A larger dehumidifier can occupy more space, but it will save you time emptying a tank and will even remove more humidity from the air in the larger area.

Number of plants
If there are more plants, it equals more watering, which means more humidity in the air. Typically, this is especially noticeable in young plants. Growing plants need different moisture levels at various stages, and young plants need 60–70% humidity for optimal growth. They require to absorb more humidity from their leaves because the roots aren’t fully developed yet. So, if you plan to do a lot of vegetative and seedling growth, consider things.
 
It is best to know if the dehumidifier can be used in different growth stages or just for flowering, seedlings, etc. Ideally, the former will need a more robust, larger, and programmable dehumidifier to handle different humidity levels.

Cleaning
Because of their moisture-producing nature, humidifiers suffers from mold growth. The humidifier should be cleaned regularly to avoid the mold particles from getting into the air. These are the most troublesome aspects of some humidifiers. Likewise, some models are poorly designed regarding cleanliness and require weekly disassembly to put them in good condition. Make sure you choose the humidifier, which is easy to clean. Else you may end up unused on a kitchen cabinet and be forgotten.

Plants’ need
If you’re purchasing the model to dehumidify the grow room, you should consider the plant you’re growing before buying the best dehumidifier for grow room. For plants, you require a high level of humidity in the early stage and a low in the flowering stage. Therefore, choose the dehumidifier, which perfectly suits your requirements, and you will adjust the humidity level as per the situation.

Portability
Nobody needs to fix the dehumidifier in a specific location permanently. Sometimes it is required for the bedroom, and at times it needs to be set in the grow room. So, make sure the dehumidifier is portable enough. This is done with the rear handles, side handles, castors, and top handles.

Filter replacement
Although not all, most humidifiers use filters. They must be replaced, although the replacement time of each filter is different for every humidifier. Some models need to replace the filters every few weeks, whereas others last about six months. Cleaning the filter will assist in prolonging the life, but you need to consider the cost of the filters and how often they need to replace when choosing a humidifier.

Coverage area
When buying the best humidifier for grow room, you need to consider the coverage area. Typically, each model has a label about the place of coverage. Therefore, before buying any model, evaluate its size and choose a suitable model. Also, determine the best room for the dehumidifier to maximize performance. If you’re growing a small number of plants in a grow room, you need the best dehumidifier in a 4×4 to grow room, covering a short area.

Ability to purify the air
These days, many dehumidifiers offer an air purification service in addition to dehumidification. They are used to remove dust, allergens, dust mites, mildew, mold, and other similar contaminants. If you can pick one that works both ways, using the dehumidifier for grow room is at a premium. Likewise, be sure to use the necessary accessories of dehumidifiers if necessary.

Conclusion

The best dehumidifier for grow tent is a crucial part to enjoy colossal growth of the plants. Humidity plays a vital role in the cultivation of crops in your grow tent.

Invest the worth dehumidifier for the flexible drawing of the moisture, allergens, mold or mildews. Choose one of the mentioned lists and make sure of the refreshing growth of your plants.

Manual plants grinders are a dime a dozen. Some of them are pretty crappy, some of them are nearly perfect, and all of them require you to physically move your wrists and hands in a twisting fashion to activate the blades. Human error worms its way into the process. And for some, that dexterity just isn’t possible. The electric plantsgrinder category is more niche, and it isn’t exactly abounding with options (unless you want to sacrifice your coffee grinder or actual herb grinder to the cause, and get it sticky with resin in the process). But it leaves less room for mishaps and can be easier to use. Besides, the plant itself will grind more uniformly.

There are three crucial features to keep in mind when looking for a good electric grinder: its energy source, its storage capacity, and its shape. Below, you’ll find nine grinders that are all great, but that are also all tailored to a slightly different need. Pens are more subtle, rechargeable batteries ensure longevity, more expensive grinders have smarter blades, larger storage chambers keep you supplied for more sessions, and so on. But once you pick one, smoking, vaping, or otherwise ingesting plants becomes all the more enjoyable.

What is a plants grinder?

A plants grinder is a tool designed to break down dried plants flower into smaller pieces, making it easier and smoother to smoke or vape.

Most plants grinders work by tearing apart plants between two sets of offset teeth in a small chamber. As you twist the grinder back and forth, the teeth crush and crumble the larger flower into finely ground pieces that fall into a collection chamber.

How much is a grinder for plants? Typically prices for plants grinders start around $5 for the most basic plastic designs. A metal grinder with specialized features costs between $40 to $100. Automatic grinders are the most expensive, usually well over $100.

What makes a good plants grinder? No matter the design or additional components, a good plantsgrinder should tick the following boxes:

Turn sticky flower into a fluffy, consistent, and crumbly final product with minimal effort
Designed with durable, long-lasting materials
Easy to clean with basic cleaning tools

ECO Farm Bluetooth Audio Aluminum Alloy 4-layer Herb Grinder

Features:

Unlike other overpriced, substandard grinders on the market, our ECO Farm grinder manufacturing process ensures our grinders are made with materials that are stronger and more durable than the competition. This herbal grinder is affordable and has a long lifespan. The 2.4" herb grinder has a large capacity to grind more herbs at once. Small and lightweight, it can be pocketed and taken anywhere. The premium grinder features a galvanized surface so there will be no problems with peeling paint. With a sharp bend Improvements to the teeth, the grinder can cut and flutter your tobacco and most herbs and spins smoothly. NOTE: Dried herbs are best.

VIVOSUN 2.5" 4 Pieces Herb Grinder Black Aluminium Spice Grinder with Pollen Scraper

Features:

VIVOSUN herb grinder is made of superior aluminum alloy and a strong magnetic lid which makes this device tougher and more durable. A magnetic lid helps you securely hold your herb and reduce spill. The stainless mesh screen helps to collect fine powders. With free scrapers, you can easily collect and remove the remaining pollen from the grinder. VIVOSUN herb grinder contains ultra sharp teeth which perfectly grind every part of the herb, from the lightest herbs to the densest, grinding now only takes several twists. These teeth stay sharp for long periods and are simple to clean.

What to Look for in a plants Grinder

Tip #1: More Chambers, More Options
A standard two-chamber grinder will get the job done, but your options become endless once you upgrade to one that has a kief catcher and additional chambers. A friend described adding “middle plants” — plant that’s not kief but more fine than what typically get used — to a Volcano to get a more flavorful high. Mess around with different combinations of consistencies to get different highs.

Tip #2: Look for the Teeth
The teeth shape, and the number of teeth, affect how the plants is broken up. However, more teeth doesn’t necessarily mean better (you don’t want plant that’s too fine right off the bat), and not enough teeth equals chunky plants and more time grinding.

Tip #3: Material Matters
There are three kinds of metals typically used to make grinders: zinc, aluminum and stainless steel. There are plastic grinders on the market, but you might encounter a broken tooth if you’re grinding tough plants. Additionally, cheaper grinders might be coated with paint or a finish, which could chip off and get into your plants. You definitely don’t want to inhale that!

Tip #4 Grip Is Important
The better grip a grinder has, the easier it’s going to be to use. And, an easier grip means you have to use less torque (the measure of force that causes an object to rotate around an axis) to grind the plants. That’s important if you’re a user who experiences a lot of hand pain.

Tip #5 Don’t be Afraid to Splurge
Grinders get a lot of use. A cheaper grinder might not last you as long as something made of high-quality metal. Paying more gives you the peace of mind that a tooth won’t break, the product won’t flake, and that nothing funky from the grinder is getting into your plants.

How Should I Clean a Herb Grinder?

Your herb grinder will need to be cleaned every so often to keep it working efficiently, otherwise the sides will get clogged up and it will stick when you try to twist it. Most of the issue comes from compacted bits of plants and the bits of resin that inevitably end up covering the surface, and if you’ve ever skipped your regular herb grinder cleaning session, you’ll know how hard it can be to remove. But there are still a few things you can do to get it back in good working condition.

Clear any debris you can. First off, you don’t want to waste your bud, so disassemble the herb grinder and get anything you can out of it. A little tool like a toothpick or a small brush can really help here if you want to get the most out of it.

(Optional) Freeze the grinder before clearing. If you want to do a deeper clean, you can try putting your grinder in the freezer for half an hour or more before you try scraping more debris free. This helps the material clump together and makes the cleaning process easier. As above, a toothbrush or soft brush helps you get more material free. It’s worth taking more time over the scrubbing if you’ve gone through this step — be thorough and get as much kief and compacted plants as you can.

Soak it in isopropyl alcohol. Put the pieces of the grinder in a container like a zip-lock bag or a jar and submerge it in isopropyl alcohol. This will help free up all the pieces stuck to the surfaces and make the next stage much easier. The only issue here is that it’s only really a good idea to do this with metal grinders, because plastic and wood would both be damaged by the process.

Scrub it. Remove the grinder from the alcohol and scrub the pieces thoroughly with a firm-bristled toothbrush. You need to be sure to get right in all the spaces around the edges and between the teeth, and cover each chamber in the process too.

Rinse the grinder and dry it. Your plants grinder should be looking pretty good now, so you can just rinse it under warm water and either dry it with a towel or leave it to dry. Make sure to thoroughly rinse it to remove any alcohol leftover. When it’s dry it’s ready to use again.

Conclusion

Each and every grinder on this list comes with a few features every stoner will love. Not only are each of them made in the United States, their patented designs are exceptionally durable and sturdy compared to the rest of the grinders out there. We picked these six grinders since they are all easy to clean and use, made with safe materials, offer a coarse and fluffy grind, and either come with a product guarantee or are built to last or offer interchangeable parts. With that said, if you’re on the hunt for a grinder or you’re just ready to ditch your cheap ones, you can’t go wrong with these.

Manually cutting down and separating stems from buds are definitely time-consuming activities. Trimming every pound of plants takes up to four to six hours, making it a lot more difficult to finish a day’s quota.

Good thing, trimmers were invented to greatly simplify the laborious work. The list below shows the best bud trimmers you can find.

Why Should You Trim?

Trimming might be an extensive process, but it is well worth the results. Some reasons why you shouldn’t skip this critical step include:

More Visually Appealing Buds
Imagine pictures of buds in magazines or advertisements at a dispensary. They look perfect as they are, all uniform and free of excess leaves.

You won’t find buds this beautiful right off the plant. To look this good, you must trim them carefully.

Higher THC Content
Trimmed buds have a higher overall THC content. The reason is that you are removing the surrounding leaves that have high sugar and low THC levels.

More Pleasant Smoking Experience
Because they are much thicker than the actual flowers, leaves don’t wick away moisture as well. The result is a harsher smoking experience.

Cured and trimmed buds, however, have a more even moisture content. The result is a pleasant smoking experience with enhanced natural flavors.

Why Isn’t Everyone Using Bud Trimmer Machines?

So, why isn’t everyone using bud trimmer machines? They seem to offer the perfect solution to a common problem. Additionally, they are readily affordable and accessible.

Some arguments against bud trimmer machines include:

Standardized
There are many different strains of plants. Their flowers all have varying shapes and densities. Some growers, therefore, claim that each bud requires its own unique, by-hand trimming approach. They feel that bud trimmer machines are too standardized and don’t consider each unique flower.

Quality
Some growers also claim that machines are too powerful. They don’t offer the same delicate touch as by-hand trimming does.

There is some truth to these claims; poor-quality machines can ruin your buds. As long as you get one with gentle rotations and non-stick features, the manicuring process will go smoothly.

ECO Farm 16 Inch Manual Leaf Bowl Trimmer Machine

Features:

The rubber strips of this ECO farm trimmer can effectively treat plants with meticulous care. Minimize residue adhesion during use, safe without plant damage. High-quality blades cut quickly and minimize damage to plants. The clear plastic top provides better visibility and you can easily and clearly see the inside of the bowl trimmer when operating. A removable handle for easy storage and removable grille for easy maintenance The leaf trimmer will cut branches and remove leaves from numerous plants for projects like essential oils, aromatherapy products, and potpourri. Specifically designed for indoor hydroponics. Note — in order to better reflect the effect of trimming, do not overfill when using, start slowly, not too fast.

VIVOSUN 16 inch Bud Leaf Bowl Trimmer

Features:

This portable bud trimmer is easy to use and clean, with a sharp stainless steel blade for wet and dry trimming for rotary cutting; a four-edged blade for wet trimming, and a serrated blade and stainless steel for dry trimming. You can harness the power of 30 scissors in 1 scissors to provide cleaning and efficiency while minimizing damage to your plants. The clear plastic dome ensures full visibility for precise trimming. The handle of the trimmer is detachable.

DL Wholesale Twisted Trimmers 16" Metal Top Bowl Trimmer

Features:

The metal top trimmer is 100% stainless steel. The absence of plastic makes them very durable. Available in closed and open top versions. The open top allows you to easily view your work and fill it without removing the top. 16" Metal Top Bowl Trimmer for removing leaves and branches of different plants for making aromatherapy products, florals and essential oils. It concentrates the power of thirty scissors in one unit. It has a removable handle for easy storage and a 100% stainless steel top for easy cleaning. This top bowl trimmer comes with a straight blade and a set of wire blades.

How to Use Bud Trimmers

Bud trimmers are as easy as they come. These straightforward machines are nearly plug-and-play and require only a few aspects from the user.

The majority of bud trimmers utilize a hopper where you can place your raw plants flowers.

These are then funneled into the barrel, where they are trimmed and processed.The differences come from the added features to the trimming system.

Some bud trimmers have collectors that efficiently gather your trimmed flowers.

Although bud collectors aren’t wholly necessary, they do make your trimming experience far easier.

Additionally, various bud trimmers come equipped with pollen extractors. These pollen extractors usually require you to change the tumbling system or the collection bag simply.

If you purchase a “smart” bud trimmer that contains a control system that allows you to configure the speed of the blades and tumbler, then you’ll be trimming in a snap.

If you choose an bud trimming system that incorporates a single preset speed, then you’ll be limited on your ability to fine-tune how your bud is trimmed.

Advantages of Bud Trimmers

Simply put, bud trimmers save you time — lots of it. These trimming machines were built to replace a roomful of trimmers while maintaining a high level of quality.

Although they do incur a significant investment, they will pay themselves off down the road.

What would normally take hours (or days), depending on the amount, bud trimmers can significantly decrease your time on hand- trimming plants flowers.

Disadvantage of Bud Trimmers

Although bud trimmers have astounding advantages, there are disadvantages.

In particular, not all bud trimmers provide the same quality that humans are capable of.

Professional human bud trimmers can manicure flowers to the highest degree, which shows the kink in the armor of electric or motorized bud trimmers.

However, bud trimmers are not far behind humans in terms of trim quality.

Due to this, this slight disadvantage may well be worth it for many that are fed up with hand-trimming pounds of plants at a time.

Conclusion

If you have grown tired of cutting buds manually and ending up with sub-par outcomes, now is the time to make the switch. Consider any of the bud trimmer machines mentioned above, and for sure, your life will be a lot easier!

It doesn’t matter whether you’re vaping, smoking or cooking with plants, if you want to get the most out of it, you’ll need a good plants grinder. Many people settle on basic, cheap grinders, and for many purposes this is absolutely fine. However, if you’re serious about plants, it’s worth investing a little more and trying to find the best plants grinder for your purposes, otherwise you’ll run into tons of annoying little issues down the line like uneven grinds and the grinder getting gunked up and stuck. Luckily, there are tons of excellent herb grinders out there, and we’ve collected some of the best ones here to help you make your decision.

What is a herb or plants grinder?

A herb grinder is also known as a plant grinder. It is nothing but a small-sized case that has teeth to grind the tobacco, or herb.

They come with one, two, and three compartments. And they are constructed with acrylic, metal, or wood.

Grinding up herbs with fingers or scissors is a thing of the past.

That’s because the whole process was inefficient. And more often than not, it would leave your hands smelling of plants. But thanks to CNC machining, grinding herbs is no more a tedious task.

But when buying a herb grinder, you have to keep in mind several important factors.

So we are going to discuss all of them below. This will give you a clear idea of how these little things work.

ECO Farm Herb Grinder Rainbow Spice Grinder with Drawer

Features:

The ECO Farm grinder has a unique design. The herb grinder 4 pieces & 3 chambers allow for grinding, storage, and filtration of pollen. Hand crank herb grinder increases the fun of grinding, the transparent top allows you to observe the whole grinding process, Stretchable drawers allow you to take out the grinded things at any time. The herb grinder with a powerful magnet lid helps considerably to reduce spilling and keep leftover herbs fresh and odor-free. Mesh Screen of the grinder with handle filters very fine pollen, the little scraper included helps for powder collecting. This spice grinder is made of solid and durable zinc alloy metal. The correct size and thickness of the grinder and teeth grant an easy and quick grinding experience. Thin Poly O-Ring for smooth grinding and less friction, more durability.

VIVOSUN 2.5" 4 Pieces Herb Grinder Black Aluminium Spice Grinder with Pollen Scraper

Features:

VIVOSUN herb grinder adopts high-quality aluminum alloy and a strong magnetic cover to make the equipment more durable. The magnetic lid helps you hold the herbs firmly and reduces spills. The stainless steel mesh screen helps to collect the fine powder. Using the free scraper, you can easily collect and remove the remaining pollen from the grinder. VIVOSUN Herb Grinder contains ultra-sharp teeth, which can perfectly grind every part of the herb, from lighter herbs to dense grinds, and now only requires a few twists. These teeth can stay sharp for a long time and are easy to clean. The grinder has unique wave grips on the top and bottom of the grinder. This design makes the grinder easy to hold and twist when grinding herbs. Only a few simple twists can get a fine powder.

Cali Crusher Grinder 4 Piece Black

Features:

Cali Crusher brand products are quickly becoming renowned for their amazing quality, yet affordability. This Cali Crusher 4 piece grinder features four stages, a perfect micron count screen, razor-sharp teeth, and neodymium magnetic closure. CNC machined grinders from one solid piece of aerospace aluminum, so no need to worry about the blade plate coming loose or teeth dropping out. This classic grinder design uses diamond-cut teeth to crush your herbs into a perfectly blended and fluffy consistency, keeping your fingers clean and your bowls evenly distributed. Make your buds ready for rolling with this practical Cali Crusher Grinder. Diamond-shaped teeth are highly efficient when it comes to grinding dry herbs easily, quickly, and effectively.

What Should I Look for When Buying the Best Plants Grinder?

After reading this guide, you might have noticed that the world of grinders is a little more complicated than you might expect. So shopping for a grinder can get a bit hands-on if you’re trying to get the best one you can. Luckily, there are a few key areas you can focus on to make sure you get something efficient that does exactly what you want it to, without over-spending or getting features you’ll never use.

Material: Generally, you’ll have a choice between getting a metal grinder, a plastic plants grinder or one made from wood. There are other possibilities — you can even find a ceramic grinder in some places — but these are the most common and generally you won’t need anything else. Plastic/acrylic is cheapest and the lowest quality, metal is effective and still not too expensive, and wood tends to use metal teeth but be more expensive. Overall you should generally stick with metal (stainless steel or anodized aluminum) or wood.

Size: A bigger grinder is really useful if you’re going to regularly get through large amounts of bud, and especially if you’ll need large amounts ready at the same time. If you’re a solo or small group smoker, a standard 2.5 inch diameter option is probably fine, but if you’re likely to need large amounts often, go for something 3 inches across or bigger.

Number of Compartments: Two-piece grinders have one compartment, so your ground bud ends up in the same part as the main grinder. Three piece grinders have a separate compartment to collect the plants after grinding, and four-piece ones have an additional compartment to catch kief/pollen. If you don’t want a kief catcher, then you can get by with a two or three-piece option, but really there is no reason not to have one — otherwise you’re just wasting material.

The Teeth: The grinder’s “teeth” are what do the grinding work. Generally speaking, more teeth mean a better grinder, provided they’re equally distributed around the grinder. For example, around 40 teeth for a 2.5 inch grinder is a good number, but as low as 30 is acceptable. The shape of the teeth also matters, with diamond and pyramid-shaped teeth working really well overall. Other shapes can work too, but looking for something with either of these is a good idea.

The Mesh Screen: The mesh screen that catches your ground bud and lets the kief fall through is an important part of a four-piece pot grinder. This can be difficult to assess, but check reviews and try to determine the quality of the screen (especially to see if it clogs). Screens are numbered based on the number of threads per inch, with 40 or 60 per inch being great for most purposes. If you want very sifted material (to make oil, for example), you can go up to 80 or 100 to get a high-quality result.

Electric or Manual: With the continual advances in technology, it’s no surprise that you can also find an electric plants grinder if you want, which either grinds the material for you or sometimes just dispenses it. An ordinary hand grinder is fine for most people, but if you want to minimize your workload, electronic ones can work really well (just at a higher cost).

Price: Of course, as much as it would be nice to shop based on quality alone, price is an important factor. As always, you get what you pay for. If you want something that will last a long time, you shouldn’t really pay less than $40 for a plants grinder. However, if you want something good but not for long-term use, you can get something good for $20.

Conclusion

An herb grinder can indeed elevate your plants experience, but the grinder market is expansive and can be challenging to navigate for first-time buyers. Even if you consider yourself an experienced smoker, grinder manufacturers are constantly improving technologies that make a grinder more useful than ever.

Luckily, there are options for new and experienced smokers that fit every budget. If you’re dreaming of fluffy bud, smooth tokes, and a low-maintenance grinding experience, we hope that our list of the market’s best plants grinders guides you to the grinder of your dreams.

If you are an indoor gardener who loves raising plants, it’s your responsibility to ensure they grow and thrive. One way of achieving this is by ensuring the growing area has the right humidity levels. But how do you regulate plant room humidity? Well, you will need the best humidifier to grow the room.

Since humidifiers come with different features and cost varying amounts, finding the best deals can be hectic. You will be in a dilemma when deciding what the best humidifier for a growing room is, but fortunately, we’ve stepped in to offer a helping hand.

Where should I place my humidifier for my plants?

In the same room as the plant, naturally, but a good standard is between 4–8 feet away. Too far and plants will not be able to absorb the moisture as efficiently. Some space gives the plant breathing room to absorb the moisture without becoming drenched. You want the humidifier to have room to disperse its goodness throughout the area your plants are in, and in close enough proximity so your plants get everything they need.

If you sleep close to your grow room, consider the noise level of the humidifier as some can be quite noisy, but the most top-of-the-line humidifiers have ultra-quiet technologies. Problem solved.

How often should you use a humidifier on your plants?

Like humans, plants have evolved, and some need more humidity than others to truly shine. Some plants rely on moisture from the environment to grow, and your natural habitat may not be favorable for your plants. This is when humidity may need to be added. If your grow environment is constantly sunny, consider using a humidifier for plants as well.

Turning your humidifier on in the morning and allowing it to run until the early afternoon ensures enough moisture to build up and last throughout the rest of the day, without oversaturating the plants. A good rule of thumb is to only use the humidifier when its sunny, as that is when plants are primed to absorb nutrients. Plants have a circadian rhythm like humans and go dormant at night: They will not absorb the moisture from a humidifier at night and will end up soggy.

Do I Really Need To Use a Humidifier on Indoor Plants?

Yes! In a study by the University of Vermont, it was found that houseplants do well at a relative humidity of 70 to 80 percent, which is often difficult to attain and maintain in the home grow environment. Adding a humidifier can remedy this imbalance and creates harmony in the home and for the plants. We hope that our comprehensive list will help you in choosing the best humidifier for plants.

ECO Farm Hydroponics 8L Capacity Air Humidifier Grow Room Tent

Features:

This ECO Farm humidifier can kill 99.9% of bacteria in water, thus atomizing sterile water into your home to increase humidity. Users of this humidifier find it durable, easy to clean and quiet to use. When set to “low”, the unit makes very little noise but adds enough humidity. Its powerful humidification is enough to keep your room comfortable all day long. The nozzle and output knobs of our plant humidifiers are very easy to adjust. With the 360° rotating nozzle and output knob, you can easily adjust the humidity to suit your space. The most serious problem reported by humidifier users is growth in the tank. This may be due to neglect to clean and maintain your humidifier, usually once a week. Our cool mist humidifier is very user-friendly, with a large opening that allows you to reach into the tank for cleaning, making cleaning and filling easier.

Pure Enrichment MistAire Ultrasonic Cool Mist Humidifier

Features:

Ultrasonic Cool Mist technology hydrates dry air safely and quickly for up to 25 hours, allowing you to breathe easier and get a more restful night’s sleep. High and low speed settings combined with a 360° spray nozzle help you consistently balance and regulate the humidity in your home year-round to relieve cold symptoms and sinus problems. The 1.5L water tank provides ideal coverage for bedrooms, offices, nurseries and other medium-sized rooms. An optional night light provides a soothing glow, while an auto-off feature turns the humidifier off when the water level is low or the tank is removed.

PureGuardian H965 Ultrasonic Cool Mist Humidifier for Grow Room

Features:

The PureGuardian H965 Ultrasonic Cool Mist Humidifier prevents dry air in your home and is ideal for those with colds, allergies and dry skin. The easy-to-fill 1-gallon tank is perfect for a 320-square-foot room and can run for up to 70 hours. Silver Clean prevents slimy mold and the growth of tank surfaces — a common problem with traditional humidifiers. The aromatherapy tray option helps create a relaxing environment with your favorite essential oils. Oil not included. Create a better home environment and optimize your comfort with an ultra-quiet, soothing cool mist. This benchtop humidifier has a low water level indicator that lets you know when to refill the tank. The night light feature makes it a great addition to a kid’s room.

Buyer’s Guide For the Best Humidifier For Grow Room And Tent

By now, we expect you to make a shortlist of the products that you want to pick up your final one from. But before you make up your mind, we’d urge you to go through the crucial buying considerations below-

The area coverage
First of all, it’s the size of the room that your humidifier is able to cover up. It basically depends on two data- the humidifying rate, and the run-time of the device. Both of these data vary from model to model.

In case you are growing in a tent; you should look for one humidifier that can cover around 100 square feet of area. In the case of larger sized tents or rooms, there are models that can cover up to 600 square feet of the area as well.

The size of the water tank
Every humidifier comes with a water tank, as it’s an imperative part of the mechanism. Now the question is, how much of water it can hold into its tank?

If the size is something as small as 1 gallon, you need to replace the water in it in every 12 to 16 hours. On the other hand, there are some models that can come up with up to 6 liters of water tank size. For those, the water changing frequency is less happening.

The humidity settings
The humidity settings or the misting settings are the amounts of humidification done by the device. If you want to take up faster humidification, there should be high settings such as 300 ml of water in an hour. In the case of smaller rooms, you might go for smaller settings.

Overall, make sure that your device comes up with at least three different misting settings in it.

The safety features
Safety is quite essential as long as an electrical device like a humidifier is taken under the radar of a buyer. What usual models come up with as a safety concern, is the automatic shut off.

Now, this particular feature might be automated, or programmable. If it’s automized, it will detect the humidity level and shut off automatically when it’s humid enough. On the other hand, some of the modules might take a preset time-span and shut off automatically after the time is up. And this is applicable for best dehumidifiers as well.

Conclusion

Growing indoor plants often means you need a grow tent or room and not to forget a humidifier. Humidifiers in your grow tent can aid vigorous plants although most gardeners think plants are always in constant battle with humidity, this is essential in regulating humidity level. With this buying guide, you can easily choose the best and easier to operate humidifier.

Getting everything in place before kick-starting your plants farming is very important.

Providing the appropriate environment your plants can thrive in is among those things you should consider first.

Growing plants in a grow tent might be a great option for you.

In this article are some of the best grow tents for plants you might want to consider. We give you the details you need to get started indoor growing.

Key Benefits of Using a Grow Tent

Creates an all-in-one grow room: Grow tents allow you to create a self-contained environment that optimizes growing your plants, allowing you to control light cycles, temperature, airflow, and smell. 
Creates a light-proof environment: Light leakage can significantly affect your harvest. And by using a light-proof tent, you have greater control of your plants’ light source and cycle.
Has reflective walls: Reflective walls help reflect light back to the plants to boost growth.
Creates privacy from unwanted eyes: Grow tents allow you to place your plants in any part of your house or garden away from people who might be judgy or ridiculous.

What do I need to buy in addition to my grow tent?

To grow the plants, you’ll need to invest in other equipment to optimize growing conditions inside your grow tent. You’ll need:

Grow Lights: You should look into a grow light system that includes a ballast, hood, hanging equipment, power strip, and a timer.
Ventilation System: If your grow tent doesn’t include a ventilation system, you’ll need to get one that includes carbon filters, ducting, duct clips, and can fans.
Pots, Growing Medium, and Seeds: You also need soil and pots for your plants to grow inside. A Pot for Pot has a wide selection of pots, growing mediums, and other products to help grow plants in a grow tent.

Gorilla 2ft x 2ft5inch x 4ft11inch w/ Ext 5ft11inch Grow Tents

Features:

The Gorilla Grow Tent features a patent-pending adjustable height extension kit that enables you to increase the height of your grow space from 7' to 8' or 9' tall. Your plants can grow up to 50%. You no longer have to worry about your plants outgrowing your grow lights and indoor grow rooms. Now you can experience squat-free action without banging your head against a low-hanging light. Gorilla Grow tents and GGT Shorty tents are made of 1680D threaded reflective fabric that is 3–9 times denser than any other grow tent. This means they are more lightfast, more durable, quieter, stronger, safer, and create the best growing environment for you and your plants. Unique “diamond” reflective walls provide greater growth light reflection and light redistribution, minimizing hot spots and maximizing your grow room setup.

Black Box 2ft x 2ft x 6.5ft Grow Tent

Features:

A black box grow tent is a sealed indoor growing space that allows new plants to be grown from seeds or cuttings without the need for an external greenhouse. Use a black box to separate plants at different developmental stages, change internal conditions according to individual plant requirements, or try different lighting to determine the best combination for growth. The exterior is made of thick black canvas with a silver reflective interior coating that allows the light from your grow lights to focus on the plants. The Black Box also features a metal frame made of durable steel tubing and heavy duty zippers; vents and cord holes provide sleeves with pull cords to seal outlets around pipes and cords. A removable dividing wall in the middle of the Black Box allows you to manipulate the growing environment to provide the best climate for your plants to grow.

Buying Guide for the Best Plant Growing Tents

There are a lot of plant and tree types out there that require specific conditions to grow. As a result, planting them outside in your backyard might not be the best idea if you want optimal results. In such cases, you should rather use something like the best plant growing plants stated up above.

We present you with a buying guide for the best plant growing tents. This consists of the following factors which can come in quite handy while picking up the perfect plant growing tents for your needs:

Size
Because a plant growing tent is generally used to grow a lot of plants, herbs, flowers, and other things at once, it is generally a great idea to get the one which has a large size. Thankfully, you can easily compare the sizes of different plant growing tents out there as all of them have their dimensions or size rating given on the box.

Starting with a smaller plant growing tents, they can have a size like 30-inch x 30-inch x 60 inch or 40-inch x 40-inch x 80 inch.

On the other hand, a larger plant growing tent may be rated at 90-inch x 90-inch x 80 inch or even 120-inch x 120-inch x 80 inch. Out of all these options, you can simply choose the one that fulfills your needs the best.

Material
Apart from the size of your plant growing tent, you should also check its construction material. This is highly important if you are going to install your plant growing tent outdoors. It should be durable enough to withstand the various environmental factors like rain, storms, and other things without getting any damage.

Fortunately, almost all of the plant growing tents available in the market use 600D Mylar fabric. Not only is this fabric quite thick and strong, but there is also a reflective surface on the inside which increases the performance and effectiveness of your planter box lights.

Warranty
Usually, you will find most plant growing tents to offer a 1-year warranty with them. If any given plant growing tent offers a longer warranty period, consider going for those as well.

Conclusion

Even if you have extreme weather conditions in your area, you can still grow your favorite plants or flowers quite easily using a plant growing tent. Apart from offering a safe and protected area for growing plants, these even come with other handy accessories like growing lights, thermometers, water dispensers, and much more.